| |
Bollard
covers come in all sorts of colors, shapes and sizes.
They can be custom designed for your specific needs. |
|
|
|
| Custom blue covers for outside Logan Airport
Terminal |
Custom gray covers for outside Logan Airport
walk way |
Custom gray covers for outside Logan Airport
drive way |
|
Logan Airport wanted custom designed
bollard covers. They decided on a simple angled
design with custom colors. The blue was designed for
the front of the terminal and the gray was designed
for the parking and walk ways.
|
|
|
|
| Close up of Remindervill's
red bollard cover |
Front shot of Remindervill's
red bollard cover |
All of Remindervill's
red "fire lane" bollard covers |
|
Reminderville's Fire Department
wanted to give their firehouse a fresh new look. Bright
red bollard covers were the
answer! Also for added safety they choose the reflective
silver tape around the top. The bollard cover is a great
alternative to painting. The bollard covers also offer
protection to the fire engines if they accidentally
contact them they will not scratch as easily. Though
it may seem obvious another benefit is they indicate
that the area outside the garage doors is considered
a fire lane! |
|
|
|
|
| 5th/3rd Bank's new yellow
caution bollard covers |
One of 5th/3rd Bank happy
patrons |
5th/3rd Bank new bollard
covers protecting the ATM |
5th/3rd Bank's new bollard
covers with reflective tape |
|
5th/3rd Bank received a few complaints
from patrons, because it is not always easy to get right
up to the window, some patrons would open their car
door to reach the window and this resulted in scratches
from the concrete poles. The bank decided to add bollard
covers. They choose the yellow for high visibility
and added the reflective tape for enhanced visibility
at night. They have received many complements from happy
patrons. |
|
|
|
| It is almost impossible
for Innoplast to show all the custom designs available. |
Here are some custom logos
for Harley Davison |
Here are some custom
handicap symbols. |
|
| |
Custom colors, sizes,
and tapes are just the beginning. Innoplast is also
able to add custom logos and symbols to your
bollard cover. The possibilities are endless!
Even if your bollards are different sizes our covers
can make them appear uniform. There is no need to
cut them to match with our Gripper Tab installation
your whole project will be done and looking great
in no time at all!
|
Our standard covers come in:
Red, Orange, Yellow, Blue, White, Gray, &
Black.
Our Standard Reflective Tape Options:
Red, Orange, Yellow, Blue, & White.
Standard sizes:
Fits 4” nominal steel pipe, all schedules
(4.500” pipe O.D.)
4" Diameter (4.700" ID) x 52" Long
- $27.00
4" Diameter (4.700" ID) x 60" Long
- $28.00
4" Diameter (4.700" ID) x 64" Long
- $30.00
Fits 6” nominal steel pipe, all schedules (6.625”
pipe O.D.)
7” Diameter (7.125” ID) x 52” Long
- $30.00
7” Diameter (7.125” ID) x 60” Long
- $32.00
7” Diameter (7.125” ID) x 72” Long
- $35.00
Fits 8” nominal steel pipe, all schedules (8.625”
pipe O.D)
8” Diameter (8.875” ID) x 72” Long
- $75.00
|
|
